HOW WOULD LIKE TO GET THIS RESULT EVERY TIME YOU DRILLED A PEN BLANK STRAIGHT DOWN THE MIDDLE NO MESSING

The sale is for a 2 Inch 2 Jaw dedicated Pen blank Drilling and Trimming Chuck For Blanks up to 25mm Square and will provide a simple to use system which will enable the user to drill parallel holes accurately every time.  for It can be fitted straight on a lathe  which has a Spindle thread size of 1" x 8Tpi however an adaptor to enable it to be used on lathes with a spindle thread measuring 3/4" x 16Tpi.

Another feature of the chuck is the ability to use it to trim the ends of the Blanks after gluing the brass tubes in place

This  Chuck will be a life saver for the dedicated Pen Maker imagine Straight holes every an no blank wastage

Thanks for looking any questions please ask

With free 7mm Brad Point Drill Bit worth £3.50

HOW WOULD LIKE TO GET THIS RESULT EVERY TIME YOU DRILLED A PEN BLANK STRAIGHT DOWN THE MIDDLE NO MESSING

The sale is for a 2 Inch 2 Jaw dedicated Pen blank Drilling and Trimming Chuck For Blanks up to 25mm Square and will provide a simple to use system which will enable the user to drill parallel holes accurately every time.  for It can be fitted straight on a lathe  which has a Spindle thread size of 1" x 8Tpi however an adaptor to enable it to be used on lathes with a spindle thread measuring 3/4" x 16Tpi.

Another feature of the chuck is the ability to use it to trim the ends of the Blanks after gluing the brass tubes in place

This  Chuck will be a life saver for the dedicated Pen Maker imagine Straight holes every an no blank wastage

Thanks for looking any questions please ask

With free 7mm Brad Point Drill Bit worth £3.50

.

The sale is for a Dedicated Pen Blank Drilling and Trimming Setup including a set of 4 of the most popular Drill bits to produce Straight Parallel holes every time without individual marking, it is also possible to trim the ends of the Blanks after they have had the Brass tube inserted and glued, in Blanks up to 30mm Square.The set up is easy to install on any lathe which has MT2 fittings on the head and tail stock.

The kit comprises of the following Items

1 x Pen Blank Drilling and Trimming Chuck with Chuck Keys

1 x MT1 Collet Body with Collet

1 1" x 8TPI x 10mm Adaptor

1 x 1.5-13mm keyed Tailstock Drill Chuck

1 x 7mm Drill bit 

1 x 9.5mm (3/8") Drill bit

1 x 10mm Drill Bit

1 x 27/64" Drill bit

1 x 5 Flute Carbon Steel Tapered Reamer for deburring Internal Brass Tubes

The sale is for one  Forth Generation four piece MT2 Pen Making Pen Press which is designed to be used for Push Fitting Pen Parts into the Finished Blanks making use of  your lathe.The set comes with 1 pair of extra pads that can be turned or drilled to your own specification.One Extra Exclusive Feature is the ability to turn one of the pen press parts in a Adjustable Pen Turning Mandrel for only £9.50 at a Later date The second picture is just for reference only to show how the fitting of the Mandrel shaft converts a pen press part into a mandrel

This system is a more  attractiviely priced than the standard push fitting Pen Press units,all you need to do is to load 1 pen press into the head stock and 1 into the tail stock and turn the head stock in to push the parts together

Thanks for looking any questions please ask

If you intend to convert this item please let me know so I can include the correct Collet

The sale is for a 6 piece set of the highest Quality  interchangeable Telescopic Wood Turning Chisels with 3 different Carbide Inserts Presented in a very high quaility Aluminium Case.The Square shafts share a common Aluminium handle allowing the shafts to be fully shortend and extended to suit the job in hand

Specifications

 3 Tungsten Carbide  Inserts 1 Round for Shaping, 1 Square for Scraping and 1 Diamond Shaped for detail Work The Interchangeable Shafts are Made From 10mm Square Stainless Steel 200mm Long The Handle is made from Aluminium Alloy 26mm in Diameter.

This set of Chisels are of the finest Quality and have been given 5 Star rating by other users

ONLY 10 AT THIS PRICE

Thanks for looking any questions please ask

The sale is for one Morse Taper2 (MT2) Revolving Mandrel Saver Tail stock.This unit is used to applies pressure across the surface area of the Mandrel locking nut cutting out the risk of deflecting the Mandrel shaft when to much pressure is applied when using a Standard Tapered revolving tail stock

Thanks for looking any questions please ask

With free 7mm Brad Point Drill Bit worth £3.50

The sale is for a high quality Morse taper 2 Starter Fixed  pen Mandrel with 6 Slimline bushes and a Alloy Steel Lock Nut.Although branded as Fixed there is a limited in and out movement of the shaft

Thanks for looking any questions please ask

Please note my Mandrels both MT1 and MT2 are supplied with a 6.13mm Diameter shaft and not like many Far Eastern import models which come with a 6mm undersized shaft which will mean all standard bushing sets will be a very loose fit and could impact on your pen turning.The only bushes which have a tight fitting are the Slimline one they supply with the Mandrel please not these slimline bushes will not fit the v6.13mm diameter shafts

 With a Free 3-13 mm Tapered Hand Reamer very useful when push fitting Pen Parts

The sale is for a MT1 Fully adjustable Pen Turning Mandrel and MT1 Rotary Mandrel Saver Revolving Tail Stock Kit

This kits gives the turner the best of both worlds a fully adjustable Pen Mandrel which cuts out the need to use spacers and a Mandrel saver which applies the pressure evenly across the surface area of the mandrel locking nut cutting out the risk of bending the Mandrel shaft when using a standard tapered revolving tale stock

Thanks for looking any questions please ask

With free 7mm Brad Point Drill Bit worth £3.50

The sale is for a MT2 Fully adjustable Pen Turning Mandrel and MT2 Rotary Mandrel Saver Revolving Tail Stock Kit

This kits gives the turner the best of both worlds a fully adjustable Pen Mandrel which cuts out the need to use spacers and a Mandrel saver which applies the pressure evenly across the surface area of the mandrel locking nut cutting out the risk of bending the Mandrel shaft when using a standard tapered revolving tale stock

Thanks for looking any questions please ask

With free 7mm Brad Point Drill Bit worth £3.50

The sale is for a high quality Morse taper 2 Fully adjustable pen Mandrel with 9 Slimline bushes.and a Alloy Steel Lock NutThe advantage over fixed mandrel is with the adjustable one it can be shortened or lenghtend to suit the pen you are making.

Thanks for looking any questions please ask

Please note my Mandrels both MT1 and MT2 are supplied with a 6.13mm Diameter shaft and not like many Far Eastern import models which come with a 6mm undersized shaft which will mean all standard bushing sets will be a very loose fit and could impact on your pen turning.The only bushes which have a tight fitting are the Slimline one they supply with the Mandrel please not these slimline bushes will not fit the 6.13mm diameter shafts Included in this Package is a spare Mandrel shaft worth £8.95

Thanks for looking any Questions please ask

 With a Free 3-13 mm Tapered Hand Reamer very useful when push fitting Pen Parts

The sale is for a high quality Morse taper 1 Fully adjustable pen Mandrel with 6 Slimline bushes and a Alloy Steel Lock nut.The advantage over fixed mandrel is with the adjustable one it can be shortened or lenghtend to suit the pen you are making.

Thanks for looking any questions please ask

Please note my Mandrels both MT1 and MT2 are supplied with a 6.13mm Diameter shaft and not like many Far Eastern import models which come with a 6mm undersized shaft which will mean all standard bushing sets will be a very loose fit and could impact on your pen turning.The only bushes which have a tight fitting are the Slimline one they supply with the Mandrel please not these slimline bushes will not fit the v6.13mm diameter shafts included in this kit a Barrel Triimmer kit

 With a Free 3-13 mm Tapered Hand Reamer very useful when push fitting Pen Parts

The Sale is for a unique MT2 Combined Pen Turners Fully adjustable Pen Mandrel and a Lathe Pen Press

The kit combines the Lathe Pen Press and the additional components needed to turn one of the Lathe Pen unit into a fully adjustable Pen making Mandrel which comes with 6 Slimline Bushes.

This Kit will enable you to first use the Pen Mandrel To turn the Pen Blanks down to size.You can then take the Mandrel remove the Shaft, Bushes and Brass locking nut and tighten into place a Pen Press Pad making up the pair ready to use for pressing the parts together.The components which make up these items are manufactured to very close Tolerances on CNC machines ensuring fine balance needed when used on the rotating lathe The collet system used in this product should be termed Heavy Duty

Please note this kit is only available through ourselves

The items if bought seperately would cost in excess of £50.00

With free 7mm Brad Point Drill Bit worth £3.50